HiP T6000 and T7500 series pumps

High performance air-driven pumps

FEATURES

  • 6-7,5 inch air cylinder
  • Available in 9 different pump ratios
  • 2.5 inch pump stroke
  • Maximum operating pressure of 4.690 bar (68.000 psi)
  • Maximum flow rate of 177 in3/min (2.9 lpm) at 80 CPM
  • Inlet air pressure 15 psi to 100 psi (1 to 7 bar)
  • Four different plunger seal materials: NBR, FKM, FFKM, EPR

HiP T6000 and T7500 series pumps

High performance air-driven pumps

Features

  • 6-7,5 inch air cylinder
  • Available in 9 different pump ratios
  • 2.5 inch pump stroke
  • Maximum operating pressure of 4.690 bar (68.000 psi)
  • Maximum flow rate of 177 in3/min (2.9 lpm) at 80 CPM
  • Inlet air pressure 15 psi to 100 psi (1 to 7 bar)
  • Four different plunger seal materials: NBR, FKM, FFKM, EPR

Our services

l

HIP official distributors

Interfluid is official distributor of HIP.

Technical assistance and after sales service

Technical support in choosing the most suitable air driven pump.

Wide stock available

Quick delivery all over the world.

Verification and implementation of technical schemes

Customized study of the project

Technical consultancy for PLC integration

All systems can be integrated with a data acquisition system.

Comparison with other brands

In terms of mechanical interchangeability and performances.

HiP T6000 and T7500 series pumps

high performance air-driven pumps

T-Series pneumatically operated liquid pumps by High Pressure Equipment’s have been developed to provide a highly safe, reliable and long lasting hydraulic power source for applications up to 68,000 psi (4,688 bar). Combining HiP’s high pressure expertise with Graco’s extensive pump engineering background, T-Series pumps address many of the shortcomings tipically found in today’s air-driven liquid pumps. These pumps are built to run at their maximum rated pressure and feature a robust motor and seal design that delivers a long lifetime. T-Series pumps do not require a lubricated air source and incorporate several features to facilitate easy installation and service. HiP T-Series pumps reach a “bubble tight” pressure stall that can be used for high pressure applications such as valve actuation, hydraulic power units, bolt tensioning, jacking, lifting, power pressing, pressure testing and proof testing components.

Applications

  • Work holding and clamping
  • Power pressing
  • Proof testing components
  • Hydraulic cylinder actuation
  • Chromatography
  • Lubrication and spraying
  • Liquefied gas transfer

Graco Datatrak electronic monitoring system

  • Stroke counter
  • Cycle rate display
  • Runaway protection

 

 

max pressure

seal materials

DATASHEET: T6000 HIP pumps

ModelRatioMaximum Working
Pressure (bar)
Maximum Working
Pressure (psi)
Displacement
per Stroke (ml)
Displacement
per Stroke (in3)
T6058576:14000580002.00.12
T6036365:1252036500 3.20.19
T6025254:11750252504.50.28
T6016163:11130162507.10.43
T6012125:1870125009.20.56
T6010101:16901000011.50.70
T600664:1440630018.11.11
T600547:1340480024.41.49
T600332:1230320036.02.20

thumbnail of T-Series Manual 3A6823A

6.9 bar (100 psi): maximum pneumatic inlet pressure

DATASHEET: T7500 HIP pumps

ModelRatioMaximum Working
Pressure (bar)
Maximum Working
Pressure (psi)
Displacement
per Stroke (ml)
Displacement
per Stroke (in3)
T7568900:14690680002.00.12
T7557571:13940571003.20.19
T7539397:1273039,5004.50.28
T7525163:11760255007.10.43
T7519195:11350195009.20.56
T7516158:1109015,75011.50.70
T7510100:16901000018.11.11
T750774:1520740024.41.49
T750550:1350500036.02.20

thumbnail of T-Series Manual 3A6823A

6.9 bar (100 psi): maximum pneumatic inlet pressure

SCHEDE TECNICHE

Contact us