Unit for pressure testing with gas and air driven multiplier
Maximum working pressure up to 30.000 psi (2.069 bar)
Unit for pressure testing with gas and air driven multiplier
Maximum working pressure up to 30.000 psi (2.069 bar)
Benefits
- Compatible with almost all gases including hydrogen
- Pressure is maintained without consuming any energy
- Automatic restart in case of pressure drop downstream
- Stall pressure adjustable
- Ideal for START/STOP applications under load
- Intrinsically safe. Comply even with hazardous environment
- Compact, lightweight, robust and weather proof
- Systems integration PLC
BENEFITS
- Compatible with almost all gases including hydrogen
- Pressure is maintained without consuming any energy
- Automatic restart in case of pressure drop downstream
- Stall pressure adjustable
- Ideal for START/STOP applications under load
- Intrinsically safe. Comply even with hazardous environment
- Compact, lightweight, robust and weather proof
- Systems integration PLC
Air driven power units for gas transfer
INTERFLUID designs and builds wide range of unit for pressure testing with gas and air driven multiplier for gas transfer and charging of cylinders and accumulators with air, nitrogen, helium, oxygen and hydrogen. The main benefit of these systems is that they don’t require an electrical connection and lubrication. These units are complete of required controls and instrumentation needed to manage the pressure and flow downstream of the gas booster.
Features
- Maximum working pressure: 30000 psi (2069 bar)
- Open tubular frame in stainless steel
- Also availabe in AISI version (to be corrosion resistant even in offshore environment)
- Pressure regulation, filtration and lubrication unit for drive air
- Maximum allowed drive air pressure: 150 psi (10 bar)
- Drive air safety relief valve
- Gas filter to the gas booster
- Gas inlet pressure gauge
- Pilot valve minimum inlet pressure upstream with automatic stop of the unit, setting to be agreed (VI)
- Pilot valve maximum outlet pressure downstream with automatic stop of the unit, setting to be agreed (VU)
- Relief valve for maximum outlet pressure downstream, setting to be agreed.
- Pressure relief valve
- ATEX certified gas booster
- Pressure gauge diam. 100 mm, scale based up to 36.000 psi (2500 bar)
- Outlet gas connection based on pressure downstream
Options
- Data acquisition with PLC or Chart recorder (CR)
- Pressure gauge diameter 150 mm, scale based on pressure (M)
- Isolation valve (VI)
- Piped exhaust of drive motor and gas section (P)
- Trolley versione, mounted with wheels
- Dual version booster (ideal for low pre-charge)
Applications
- High pressure gas testing of valves, fittings, tubing, cylinders, tanks etc…
- Leak testing with helium
- Mechanical seals
- Accumulator charging
- Airbag testing
- Gas transfer
- Gas Injection (foaming)
- Gas cylinder refill
- Tyre inflation
Versions
| Series | Compression ratio | MAWP (psi) |
|---|---|---|
| 5G-SS | from 7:1 to 75:1 | from 500 to 11.250 psi |
| 5G-SD | from 60:1 to 150:1 | from 8.700 to 22.500 psi |
| 5G-DS | from 4:1 to 75:1 | from 400 to 17.000 psi |
| 5G- DD | from 14:1 to 150:1 | from 2500 to 30.000 psi |
| 5G-TS | from 4:1 to 50/92:1 | from 1.200 to 30000 psi |
| 5G-TD | from 28:1 to 60/150:1 | from 1.200 to 28500 psi |
You might like
Gas booster
Converts compressed air into high pressure (up to 2069 bar) on the principle of differential working areas. No electrical connection or lubrication is required.
Power unit for gas charghing and testing
Complete of required controls and instrumentation needed to manage the pressure and flow downstream of the gas booster. They are ideal for any application where portability is required.
Gas Booster
Converts compressed air into high pressure (up to 2069 bar) on the principle of differential working areas. No electrical connection or lubrication is required.
Power unit for gas charghing and testing
Complete of required controls and instrumentation needed to manage the pressure and flow downstream of the gas booster. They are ideal for any application where portability is required.