Unit for pressure testing with liquids
Ideal for hydrostatic pressure tests with water and oil up to 72.500 psi (5.000 bar)
Unit for pressure testing with liquids
Ideal for hydrostatic pressure tests with water and oil up to 72.500 psi (5.000 bar)
Benefits
- Compatible with almost all fluids
- Hydraulic pressure is maintained without consuming any energy
- Automatic restart in case of pressure drop downstream
- Stall pressure adjustable
- Ideal for START/STOP applications under load
- Intrinsically safe. Comply even with hazardous environment
- Compact, lightweight, robust and weather proof
- Maximum portabiliy thank to low weight (valid for portable unit)
- Systems integration PLC (valid for standard unit)
BENEFITS
- Compatible with almost all fluids
- Hydraulic pressure is maintained without consuming any energy
- Automatic restart in case of pressure drop downstream
- Stall pressure adjustable
- Ideal for START/STOP applications under load
- Intrinsically safe. Comply even with hazardous environment
- Compact, lightweight, robust and weather proof
- Maximum portabiliy thank to low weight (valid for portable unit)
- Systems integration PLC (valid for standard unit)
Air driven hydrostatic test equipment for water and oil
Interfluid designs and makes a wide range of air driven power units ready for use, the maximum achievable pressure is 72.500 psi (5000 bar) with 150 psi of compressed air.
The main fluids usable are water and oil. These units are completed with required controls and instrumentation needed to manage the pressure and flow downstream of the liquid pump.
They are ideal for any application where portability is required, building a portable unit for liquid with HIP T-series pumps.
Standard options:
- Data acquisition
- Tank (T)
- Chart recorder (CR)
Features
- Maximum working pressure: 72.500 psi (5000 bar)
- Compatible with all hydraulic fluids: water, distilled water, oil, liquefied gases & mild chemicals
- Open tubular frame in stainless steel
- Pressure regulation, filtration and lubrication unit for drive air
- Also availabe in AISI version (to be corrosion resistant even in offshore environment)
- Maximum allowed drive air pressure: 150 psi
- Drive air safety relief valve
- 12 litre liquid tank
- Liquid filter to the pump
- Pressure relief valve with return to the tank
- Pressure gauge diam. 100 mm, scale based up to 87.000 psi
- Outlet liquid connection based on pressure downstream
Applications
- Hydrostatic testing of tubing, ducts, valves, cylinders, tanks
- Hydrostatic pressure test with certification
- Leak testing of components
- Instrumentation calibration
- High pressure flushing unit
- Control panels/wellhead emergency shutdown
- Control/action of valve actuators
- Power unit for tensioning – torque tools
- Packers inflation
- Accumulators charging
- Press overload circuit
- Blocking cylinder actuation
- Burst test benches
- Test valve gaskets
- Testing with Skydrol
Versions
| Series | Compression ratio | MAWP (psi) | Flow (ln3/min) |
|---|---|---|---|
| SM-3 | from 5:1 to 225:1 | from 500 to 22850 psi | from 24 to 550 |
| 3L-SS | from 8:1 to 220:1 | from 1160 to 15000 psi | from 24 to 500 |
| S-216 | from 10:1 to 300:1 | from 1000 to 30500 psi | from 36 to 540 |
| 5L | from 10:1 to 900:1 | from 1450 to 80.000 psi | from 30 to 1220 |
| T-PUMP | from 32:1 to 900:1 | from 3200 to 68000 psi | from 50 to 550 |