Electric gas boosters
Same performances as air driven gas booster but lower energy consumption
FEATURES
- Max working pressure: 14.500 psi (1000 bar)
- Compatible with nearly all gases (air, nitrogen, helium, argon, hydrogen, oxygen)
- The pressurization chamber and non-return valves in contact with gas are in AISI316
- Complete with the separation between the gas and atmosphere section, with the possibility of channelling leaks.
- They work with a 2 HP motor (single-phase or three-phase)
- Version with ATEX components available
- Cooled high pressure section
Electric gas boosters
Same performances as air driven gas booster but lower energy consumption
Features
- Max working pressure: 14.500 psi (1000 bar)
- Compatible with nearly all gases (air, nitrogen, helium, argon, hydrogen, oxygen)
- The pressurization chamber and non-return valves in contact with gas are in AISI316
- Complete with the separation between the gas and atmosphere section, with the possibility of channelling leaks.
- They work with a 2 HP motor (single-phase or three-phase)
- Version with ATEX components available
- Cooled high pressure section
- Version with ATEX components available
- Cooled high pressure section
Our services
HII official distributors
Interfluid is official distributor of HII.
Technical assistance and after sales service
Technical support in choosing the most suitable gas booster.
Wide stock available
Quick delivery all over the world.
Verification and implementation of technical schemes
Customized study of the project
Technical consultancy for PLC integration
All systems can be integrated with a data acquisition system.
Comparison with other brands
In terms of mechanical interchangeability and performances.
Electric gas boosters
same performances as air driven gas booster but lower energy consumption
The Electric Gas Booster can generate up to 14.5000 psi (1000 bar), depending on the size selected.
It keeps the flow rate constant as the pressure increases by means of the gear motor with which it is equipped.
The booster is equipped with 2 adjustable micro switches to stop the engine when the desired pressure is reached, or in the event of a lack of gas to be compressed, the gas inlet filter, gas line isolation valve, and exhaust valve.
Advantages: maximum reliability and safety:
- It does not require pneumatic power
- Engine power contained to 2 HP
- Automatic start in the event of a leak downstream
- Adjustable stall pressure
- A large assortment of special modifications are available
- Easy implementation of automatic controls
Main applications:
- High pressure gas/pneumatic testing of valves, fittings, tubing, cylinders, tanks etc…
- Leak test with helium
- Mechanical seals
- Accumulator charging
- Airbag testing
- Tri-mix charging
Electric gas booster for Hydrogen uses
