eTensifier: electric pump system
Plug and play, simply plugs into a wall outlet – no need for an air compressor
FEATURES
- Pressure up to 36.500 psi (2515 bar)
- Patented motor (1.6 cv brushless DC 50Hz 9 Amp)
- CE marked (240 V)
- Manual and automatic mode
- Gaskets in contact with the fluid available in nitrile, Viton and EPR
- Integral pressure transducer
- 2 year warranty
- Portable
- Stops at the set pressure
- Fluid section in AISI
eTensifier: electric pump system
Plug and play, simply plugs into a wall outlet – no need for an air compressor
Features
- Pressure up to 36.500 psi (2515 bar)
- Patented motor (1.6 cv brushless DC 50Hz 9 Amp)
- CE marked (240 V)
- Manual and automatic mode
- Gaskets in contact with the fluid available in nitrile, Viton and EPR
- Integral pressure transducer
- 2 year warranty
- Portable
- Stops at the set pressure
- Fluid section in AISI
Our services
HIP Sprague official distributor
Interfluid is official distributor of HII Sprague.
Technical assistance and after sales service
Technical support in choosing the most suitable pump.
Wide stock available
Quick delivery all over the world.
Verification and implementation of technical schemes
Customized study of the project.
Technical consultancy for PLC integration
All systems can be integrated with a data acquisition system.
Comparison with other brands
In terms of mechanical interchangeability and performances.
eTensifier: electric pump system
plug and play, simply plugs into a wall outlet – no need for an air compressor
The “plug and play” eTensifier simply plugs into a wall outlet with no need for an air compressor. With eTensifier the noise levels decrease, if compared to pneumatic motors. Depending on the application (hydraulic tests, tool holding, tensioning and R&D) it can be used both in manual and automatic mode.
The portable, lightweight (only 46 lbs) eTensifier will deliver hydraulic/liquid pressures to 36.500 psi (2515 bar) with a smoother flow rate from zero to full pressure and a quiet electric motor.
eTensifier features a new quick-connect system for exchanging pump lowers to facilitate routine maintenance without taking the whole pump out of commission.
Smart Control
- Pressure knob feature for standard jobs.
- Pressure test mode – set it and forget it.
- Cycle counter for routine maintenance planning.
ProConnect
- First-of-its-kind quick change Sprague pump lower.
- Install a spare lower to finish your job.
- No more downtime in the middle of a job.
Benefits:
- Cheaper
- Resettable cycle counter
- no need for an air compressor
- stall pressure maintained
- Smoother flow rate from zero to full pressure
- Plug & Play
- Quick change pump lowers
- Lightweight and portable
- Test pressure repeatability
- Quieter than pneumatic motors
Applications:
- Hydraulic tests
- Tool holding
- Tensioning
- R&D
max pressure
max flow rate
| eTensifier model | Maximum Pressure (bar) | Maximum Pressure (psi) | Flow rate at pressure (Lpm) | Flow rate at pressure (in3/min) |
|---|---|---|---|---|
| 46 | 315 | 4.600 | 0.9 | 59 |
| 60 | 420 | 6.000 | 0.8 | 53 |
| 87 | 605 | 8.750 | 0.7 | 45 |
| 100 | 685 | 10.000 | 0.6 | 39 |
| 125 | 860 | 12.500 | 0.5 | 32 |
| 160 | 1.100 | 16.000 | 0.4 | 26 |
| 237 | 1.635 | 23.750 | 0.3 | 18 |
| 365 | 2.515 | 36.500 | 0.2 | 12 |
